Sleep Timer - Teac SR-L250i Manuel Du Propriétaire

Adjusting the bass and treble sound
You can change the bass and treble sound between
"–5" to "+5".
Press the BASS or TREBLE button. And then press
the VOLUME button (– or +) to adjust the sound
level within 3 seconds.
Headphones
Insert the headphones plug into the PHONES jack,
and adjust the volume.
CAUTION
Always lower the volume level prior to plugging in
your headphones. TO AVOID DAMAGING YOUR
HEARING - Do not place your headphones on your
head until after you have plugged them in.

Sleep timer

Each press of the SLEEP button permits setting an
interval (from 90 down to 10 minutes). The unit will
automatically turn off and then into Standby mode.
Each press of the SLEEP button changes the time
indication by 10 minutes.
90 80
OFF
< When you want to check remaining time, press the
SLEEP button once.
< If you press the SLEEP button twice, the sleep timer
is cancelled.
Lighting-up the display window in
standby mode
To light up the display window in standby mode,
press the SNOOZE/DIMMER button.
The display window is lit for 20 seconds.
< The display window is lit with the highest
brightness regardless the setting of dimmer.
.........
10
17