Programmed Playback 1; Lecture Programmée 1 - Teac SL-D80 Manuel Du Propriétaire

Table des Matières

Publicité

1
1
M E M O R Y
2
3
M E M O R Y
4
12
家电维修技术论坛 http://www.bjjdwx.com/forum.php
79网络 http://www.79wl.com

Programmed Playback 1

Up to 20 tracks can be programmed in the
desired order.
< Shuffle playback does not work during
program playback.
4
2
3
< Insert a disc and select "CD" before
beginning programming.
1
Press the MEMORY button in the stop
mode.
PROGRAM indicator blinks, and "P01"
appears on the display.
2
Within 7 seconds, press the SKIP/
SEARCH button (. m or , /) to
select a track.
< If the SKIP/SEARCH button isn't pressed
within 7 seconds, program mode will be
canceled.
3
Within 7 seconds, press the MEMORY
button.
The track is programmed, and "P02" is
displayed.
Repeat step
tracks.
< You can program up to 20 tracks.
< To cancel the program mode, press the
STOP button (H).
4
When the selection of track numbers is
completed, press the PLAY/PAUSE
button (y/J) to start program playback.
If the PLAY/PAUSE button isn't pressed
within 7 seconds, the PROGRAM
indicator will go off. In that case, press
the PROGRAM/SHUFFLE button twice and
then press the PLAY/PAUSE button to
start program playback.
The programmed contents is kept in
memory even after the AM/FM button is
pressed or the power is turned off.
2
and
3
to program more
ENGLISH
Lecture programmée 1
Jusqu'à 20 pistes peuvent être programmer
dans l'ordre désiré.
< La lecture aléatoire ne fonctionne pas
durant la lecture programmée.
< Choisir un disque et "CD" d'avance.
1
Appuyer sur la touche MEMORY durant
le mode arrêt.
L'indicateur "PROGRAM" clignote et
"P01" est affiché
2
En dedans de 7 secondes, appuyer sur la
touche SKIP/SEARCH (. m ou
, /) pour choisir une piste.
< Si la touche SKIP/SEARCH n'est pas
appuyée en dedans de 7 secondes, le
mode programmation est annullé.
3
En dedans de 7 secondes, appuyer sur la
touche MEMORY
La piste est programmée et "P02" est
affiché.
Répéter les étapes
2
programmer d'autre pistes.
< Vous pouvez programmés jusqu'à 20
pistes.
< Pour annuller la programmation, appuyer
sur la touche STOP (H)
4
Quand vous avez terminés avec votre
sélection de pistes, appuyer sur la
touche PLAY/PAUSE (y /J ) pour
commencer la lecture programmée.
Si la touche PLAY/PAUSE n'est pas
appuyée en dedans de 7 secondes,
l'indicateur PROGRAM s'éteint. Dans ce
cas,
appuyer
sur
PROGRAM/SHUFFLE deux fois et ensuite
appuyer sur la touche PLAY/PAUSE pour
commencer la lecture prorammée.
La programmation est retenue en
mémoire même si la touche AM/FM est
appuyée ou l'appareil est éteint.
FRANÇAIS
et
3
pour
la
touche

Publicité

Table des Matières
loading

Table des Matières