Table des Matières
Publicité
STEP 9: ANTENNAS
Screw the external 2.4 GHz WiFi antenna using an Antenna extension cable
to the designated position on the back of the Video Door Station. Screw also
the external 433 MHz RFID antenna using an Antenna extension cable to
the designated position on the back of the Video Door Station. We recommend
to feed the antennas out of the housing for better reception and transmission
power, because it is made of metal (shields). If you don't want to use WiFi
or RFID at all, you don't have to screw the respective antenna to the designa-
ted position.
STEP 10: FINAL ASSEMBLY
Applies only to DoorBird Video Door Station D201 and D202: Screw the front
panel with the attached Video Door Station to the mounting housing with
the safety screws and the appropriate tool. Applies only to DoorBird Video
Door Station D203 and D204: Mount the Video Door Station with appro-
priate screws/dowels on the wall/fence. D205: Depends on the environment /
integration. If necessary, call a professional for help.
STEP 11: ACTIVATING THE VIDEO DOOR STATION
Switch on the power to the wires leading to the assembly location again.
You can see whether you have connected the power supply properly from the
Diagnostic LED (it lights up once the power has been connected correctly
for up to five minutes and continuously in night-vision mode). The video door
station is ready for operation (booting up process, any software updates, etc.)
once it has emitted a short diagnosis sound from the integrated loudspeaker.
This may last for up to 5 minutes. Should you not hear a beep, please check
the power supply. Please also check whether you have used a wall-plug
power-supply and not PoE and whether you have connected the positive
pole and negative pole to the video door station correctly.
STEP 12: DOWNLOADING AND INSTALLING THE APP
Download the „DoorBird" app by Bird Home Automation onto your mobile
device from the Apple app store or Google Play store. You can always find the
most up-to-date version of the App manual on www.doorbird.com/support
If you use WiFi for connecting the video door station to your Internet router,
first go to „Settings > WiFi Setup" and follow the instructions.
If you have finished the WiFi set-up or have connected the video door station
to your Internet router by means of a network cable, go to „Settings > Add
device" and click on the QR code icon in the „User" field. Scan the user QR
code found on the „Digital Passport" that accompanies the video door station.
If you have problems adding the video door station to the App please check
16
16
Publicité
Table des Matières
