Technical Information; Specifications - broda 30VT Mode D'emploi

5 TECHNICAL INFORMATION

5.1

Specifications

Specifications Based on 20" Wide Centric Tilt Semi-Recliner
1. Back Recline:
2. Seat Tilt:
3. Frame:
4. Seat/Back Surface:
5. Arms:
6. Leg Rest:
7. Footrest:
8. Wings:
9. Padding:
10. Casters:
11. Seat Depth:
12. Seat Height:
13. Seat Width:
14. Overall Width:
15. Overall Weight:
All dimensions are ± 0.5".
Up to 90º (infinitely adjustable) Model
Up to 25º of seat tilt (infinitely adjustable)
16 gauge powder coated tubular steel
Broda Comfort Tension Seating Strapping is 1.5" wide, by .130" thick; contains
fungicide, has shape memory retention, is fire retardant
Adjustable armrest height
Leg rest elevates with back recline
Leg rest adjusts independently of back recline
Leg rest adjusts to any angle between horizontal and vertical
Flip down removable/adjustable footrest
Removable wings
Removable standard padding – headrest, upper & lower side pads, shoulder bolsters
with wings, sole & calf pad, seat & back pads with terry or vinyl covers
The 34 ounce healthcare vinyl fabric covering is manufactured to meet the following
requirements: DIN 75 200/DIN 53 438; MVSS 302, M2;CAL 117, and Wyzenbeck
Heavy Duty Abrasion Test; has an antimicrobial, antibacterial, anti-stain and anti-static
finish; Cold crack of -20ºC. Polyurethane foam meets CAL 117-2013.
Removable seat and back pads are covered with an 8 ounce soft vinyl which meets
CAN2-162 flammability standard for hospital textiles. Polyurethane foam meets CAL
117-2013. Removable, washable, pre-shrunk fitted cotton terry covers are provided for
the seat and back pads. Terry covers provide absorption, and vapor and heat transfer.
Three 5" total lock casters, one 5" directional locking caster
Non-marking grey rubber tires.
17"
Adjustable 19.5" – 21.5"
20" (18" also standard)
29"
Approx. 90 lbs standard features
16