Flip Down Footrest; Removable Wings - broda 30VT Mode D'emploi

3.4

Flip Down Footrest

The flip down footrest is removable and length
adjustable.
To Attach the Footrest:
-Insert the right end of the footrest upper cross piece into
the desired hole in the right side of the leg rest frame.
-Insert the left end of the footrest upper cross piece into
the corresponding hole in the left side of the leg rest
frame.
-Release the tension on the spring mechanism.
To Remove the Footrest:
-Lift up the footrest slightly to discontinue contact
between the straps on the footrest and the leg rest.
-Squeeze the footrest to the right to activate the spring
mechanism, and release the left and right side.
3.5

Removable Wings

Wings support the Shoulder Bolsters which provide
upper body lateral support to the resident.
To Remove the Wing:
-Depress the top button (1) and pull the wing from the
receptacle. The wing may be moved out of the way
without its full removal.
-To completely remove the wing, depress the bottom
button (2) and remove from the receptacle.
To Insert the Wing:
- Insert the lower end of the wing into the lower
receptacle.. Then insert the upper end into the upper
receptacle. Ensure the wing is secured in place.
12
Length
Adjustment
Increments
1
2