Adjustable Seat Height; Casters; Accessories (Options) - broda 30VT Mode D'emploi

3.8

Adjustable Seat Height

To adjust the seat height
-Using 7/16 wrenches, remove the bolts.
-Raise or lower the front of the seat to correspond
with the holes at the desired seat height.
- Insert the bolts through the desired corresponding
holes and tighten the bolts.
3.9

Casters

The Basic chairs feature three 5" total lock casters and
one 5" directional locking (tracking) caster. (dark grey
pedal) The tracking feature allows for easy
maneuverability.
To Operate the Casters:
Step on/off the caster pedal to lock/unlock the caster.
Always ensure the brakes are unlocked when
wheeling the chair.
For chairs with rear mag wheels, lock and unlock
using the handbrake.

3.10 Accessories (Options)

We recommend Broda accessories for use only on Broda chairs. The correct installation of the Broda accessory is
very important. We recommend that the Broda chair is ordered with the required accessories already installed. Only
authorized caregivers who thoroughly understand the accessory installation procedures should attempt to install their
Broda accessories without assistance from their local Broda representative. Broda does not recommend use of other
manufacturer's accessories on Broda chairs.
14
2
1