Base Station; Integrated Battery; Functional Description - AL-KO solo Robolinho 1100 Traduction De La Notice D'utilisation Originale

Masquer les pouces Voir aussi pour solo Robolinho 1100:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 85
GB
2.7

Base station

3
6
4
No.
Component
1
Charging contacts
2
Base plate
3
Spring force terminals for boundary
cable
4
Low voltage cable
5
Cover
6
LEDs for status display
2.8

Integrated battery

The battery is installed permanently in the appli-
ance and may not be changed by the user.
NOTE
Fully charge the rechargeable battery be-
fore using it for the first time. The re-
chargeable battery can be charged in any
charge status. Interrupting charging does
not damage the rechargeable battery.
The rechargeable battery can only be
charged after the appliance has been
switched on.
The integrated battery is partially charged on
delivery. The battery is regularly recharged
during normal operation. The appliance re-
turns to its base station for this.
The integrated electronic control unit with a
monitoring function terminates the charging
procedure when a 100% charge status is
reached.
40
1
2
1
3
6
5
The charging process only functions with per-
fect contact of the charging contacts on the
base station with the contact surfaces of the
appliance.
The built-in protection circuit prevents the
battery from being charged at temperatures
above 45 °C. This prevents irreparable dam-
age to the battery.
If the operating time of the battery is reduced
in spite of it being fully charged, have the bat-
tery replaced by a new genuine battery. This
task should be carried out by an AL-KO
dealer, technician or service partner.
If the battery charge level has dropped below
the threshold set by the manufacturer as a
result of ageing or excessively long storage,
this means it can no longer be recharged.
Have the battery and the monitoring elec-
tronic control unit checked by an AL-KO
dealer, technician or service partner, and re-
place them if necessary.
The battery status is shown on the display.
Check the battery status after about 3
months in storage. To do so, switch on the
appliance and read off the battery status. If
the rechargeable battery is now only charged
to approx. 30 %, place the appliance in the
base station and switch it on so the re-
chargeable battery is charged.
If electrolyte has escaped into the appliance:
Have the appliance repaired by an AL-KO
service centre.
If the rechargeable battery has been re-
moved from the appliance: If the eyes or
hands have come into contact with escaped
electrolyte, flush them immediately with wa-
ter. Immediately consult a doctor.
2.9

Functional description

Moving on the grass surface
The automatic lawn mower moves freely in a
mowing area delimited by a boundary cable. The
appliance is oriented by sensors that detect the
magnetic field of the boundary cable.
If the appliance encounters an obstacle, it stops
and then continues in another direction. If the ap-
pliance detects moisture, it automatically returns
to the base station. If the appliance gets into a
situation where it cannot operate, it switches off.
Product description
Robolinho 1100/110

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Solo robolinho 110

Table des Matières