Publicité
Les langues disponibles
Les langues disponibles
(Left side lower lift arm)
Using bolts, washers, collars and nuts, install the lower lift
arm to the bag base.
Tightening torque: 40 to 50 N-m (4.1 to 5.1 kgf-m)
A Set the washers on both sides. Insert the bolt from the
outside.
A Apply grease between the lift arm and the bag base.
(1) Bolt (M14 x 70)
(2) Washer
(3) Collar
(Upper lift arm)
The position of the hole for setting is different between
GZD15-3 and GZD21-2.
Using bolts, washers, collars and nuts, install the upper lift
arms to the bag base.
Tightening torque: 40 to 50 N-m (4.1 to 5.1 kgf-m)
A Set washer on both sides. Insert the bolt from the
outside. (Same as the left side lower lift arm.)
A Apply grease between the lift arm and the bag base.
(1) Bolt (M14 x 70)
(2) Upper lift arm
(3) Bag base
All manuals and user guides at all-guides.com
(4) Nut (M14)
(5) Lower lift arm
(6) Bag base
(A) for GZD15-3
(B) for GZD21-2
BInstalling the Lift Rod
Temporarily fix the lift rod (2) to PIPE, ROPS UNDER (1)
with the M10 x 16 bolts (3) on both sides. Tighten up the
bolts.
Tightening torque: 48.1 to 55.9 N-m (4.9 to 5.7 kgf-m)
(1) PIPE, ROPS UNDER
(2) Lift rod
(3) M10 x 16 bolt
BInstalling the Cylinder
Using the headed pin (3) and snap pin (4), connect the
cylinder (2) to the lower lift arm (1).
(1) Lower lift arm
(2) Cylinder
(3) Headed pin
(4) Snap pin
9
(A) For GZD21-2
(B) For GZD15-3
Publicité
