Hitachi RAR-7PE1 Manuel D'instructions page 2

NAMES AND FUNCTIONS OF REMOTE CONTROLLER
This controls the operation function and timer setting of the room air conditioner. The range of control
is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter.
MODE selector Button
Use this button to select the
operating mode. Every time
you press this button, the
mode will change from
(AUTO) (HEAT)
(DEHUMIDIFY)
(COOL) and (FAN)
cyclically.
( Page 3)
ECO Button
Use this button to set the
ECO mode.
( Page 11)
TIMER OFF Button
Select the turn OFF time.
( Page 7)
TIMER ON Button
Select the turn ON time.
( Page 7)
POWERFUL Button
Press this button to start
powerful operation.
( Page 8)
Precautions for Use
• Do not put the remote controller under direct sunlight and high temperature.
• Do not drop it on the fl oor, and protect it from water.
• If you press the FUNCTION button during operation, the air conditioner may stop for about 3 minutes
for protection before you can start it again.
Signal Transmission
- 2 -
Transmission Sign
The transmission sign blinks
when a signal has been send.
ON/OFF Button
Press this button to start
operation.
Press it again to stop operation.
( Page 3)
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing.
( Page 3)
FAN SPEED Button
Select the fan speed for cooling
and heating mode.
( Page 7)
UP/DOWN Button
Control the angle of the
horizontal air deflector.
( Page 12)
LEAVE HOME Button
( Page 8)
FROST WASH/CLEAN
Button
( Page 9)