Abus TVVR36000 Notice D'utilisation page 95

Configuration
Trigger alarm output
User
Warning
Note down the admin password.
The following password is preset
"1 2 3 4 5"
You can add new users, delete existing users and
change the settings in the "User Management" menu.
1. To add a new user, select Add.
Parameter Setting
User Name Unique identification
Password Access code for the device (device
management)
Note: Change all passwords on a regu-
lar basis, using a combination of letters
and numbers. Note down all pass-
words in a safe place.
Confirm Enter the access code again here
Level IMPORTANT:
More access rights can be set on the
Manager level than on the User level.
User's MAC MAC address of the network adapter
95
All manuals and user guides at all-guides.com
The selected alarm output is
switched in the event of a
fault.
Address on the PC of the corresponding user
Note:
This limits access to the PC whose
MAC address is entered here!
2. Enter the name and password and confirm the
password in the field below.
3. Select the level and enter the MAC address.
4. Confirm the settings by clicking Apply.
Warning
Pay attention to the instructions below on assign-
ing access rights.
Setting permission rights
Control the access rights of the user by clicking the
"Right" symbol. Only the access data of users added
manually can be changed:
Note
The user can make the settings locally (i.e. on the
device) or change the parameters.
The user can access the device via the network
connection.
The "Camera Permission" tab is used to set ac-
cess rights for individual cameras (network or lo-
cal).
Parameter Setting
Local confi- Local log search
guration
Local parameter settings
Local camera management
Advanced settings
Network shutdown / reboot
Remote con- Camera rights:
figuration Remote log search
Remote parameter settings
Remote camera management
Remote video output control
Two-way audio
Remote alarm control
Advanced settings