Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Description and assembling
1. Protective grill front (with ring)
2. Plastic screw cap fan blade
attachment
3. Fan blade
4. Plastic screw gland (attachment
protective grill)
5. Protective grill back
6. Standard
7. Plastic base
8. Plastic screw gland (attachment
base)
9. Adapter inclusive connection plug fan
side
Step 1
Remove the packaging material and keep it out of the reach of children.
Step 2
Before continuing, make sure that the plug is not inserted in the socket.
Step 3
Remove (8) the plastic screw gland (foot fastening) from the stand (6)
and place the stand (6) in the plastic base (7), this fits through the
design in only one way. Mount the plastic foot (7) firmly to the stand
(6) using (8) the plastic screw fitting (foot mounting).
Step 4
Turn (2) the plastic screw cap (fan blade fastening) of the fan shaft,
paying attention to rotate clockwise to disassemble this screw cap.
(LOOSEN).
Step 5
Turn (4) the plastic screw gland (protective grid fastening) of the motor
housing, counterclockwise to remove this screw gland
Step 6
Place (5) the rear protective grid against the front of the motor housing.
Make sure that the positioning pins on the motor housing are correctly
positioned in the holes in the protective grid.
Step 7
Now tighten (4) the plastic screw gland (protective grid fastening)
tightly clockwise on the thread of the motor housing.
Step 8
Remove the PVC sleeve from the motor shaft.
Step 9
Place (3) the fan blade on the motor shaft. Important! Make sure that
the pins on the motor shaft are correctly positioned in the recesses in
the fan blade.
Step 10
Tighten (2) the plastic screw cap (fan blade attachment) firmly anti-
clockwise on the motor shaft to secure the fan blade.
Step 11
Check that the fan blade rotates properly.
Step 12
Now place (1) the front protective grille (including the pre-assembled
plastic ring) on (5) rear protective grille. Make sure that the rear
protective grid fits into the recesses of the plastic ring. This is easiest
working from top to bottom.
22
Publicité
Table des Matières
