Setting The Mode At The End Of The Tape - Sony SVT-L400 Mode D'emploi

To clear the P indicator
MENU RESET
Press MENU RESET.
To clear the power interruption/moisture
condensation data
Press MENU until the POWER FAILURE/DEW
display appears and press MENU RESET with pointed
material.
All manuals and user guides at all-guides.com
Setting the Mode at the End of
the Tape
You can set the mode of the tape operation when the
tape comes to the end during recording using the SET
UP 3 display.
When the REPEAT REC switch is set to OFF
1
Press MENU until the SET UP 3 display appears
on the screen.
<SET UP 3>
ALARM MODE
ALARM SPEED
ALARM DURATION
EXT TIME ADJ.
TAPE IN MODE
TAPE END MODE
TAPE END OUT
CLOG DETECT.
SERIES REC
RS-232C
2
Set TAPE END MODE to REW, STOP or EJECT
by pressing REC/PLAY SPEED +/–.
REW: when the tape comes to the end, the VCR
rewinds the tape automatically and enters stop
mode at the beginning of the tape.
STOP: when the tape comes to the end, the VCR
enters stop mode at once.
EJECT: when the tape comes to the end, the tape
is ejected at once.
3
Press SEARCH to return to the normal display.
When the tape reaches the end
The OFF indicator lights in the display window.
Press 6 EJECT, r REC, ) FF, 0 REW or
z PLAY to turn off the OFF indicator.
When the REPEAT REC switch is set to ON
Follows the steps 2 through 4 in "Recording on the
Same Cassette Repeatedly — Repeat Recording" on
page 17.
Y1
6H
20S
01:00
STOP
REW
-3M
Y
N
9600
19