Ribimex RIBITECH PRM115/501 Manuel D'instructions Et D'utilisation page 22

V. OPERATION
5.1- Intended use
- The product is intended for indoor (or under shelter) domestic use.
- The product is intended for grinding or polishing diverse types of materials (e.g. metals, marble, plaster ...)
by using the appropriate accessory.
- Do not use the grinder for working on products containing asbestos or other toxic or hazardous materials.
- Do not use the tool for purposes not appropriate (eg cutting of products containing hazardous materials ...),
or for any use not described in this manual.
- The tool is not intended for commercial, professional, artisanal and/or industrial use.
- Do not use other types of disks other than those recommended by the manufacturer to avoid a hazard.
5.2- Operation
5.2.1- Switching ON (Fig.8)
1. Connect plug to power source.
2. With your thumb:
 Slide the unlock button (a) forward and then
 press down the ON/OFF switch (b).
5.2.2- Switching OFF(Fig.8)
To switch off the unit, release the unlock button (a) backwards and release the ON/OFF switch (b).
Note: when switch is released, the disc continues to rotate.
Wait until the disc comes to a complete stop before any intervention or before putting down the tool.
Note: once unit is switched off, never slow down the disc by applying pressure on its faces.
5.3- Tips:
- Do not apply to much force on tool that could slow down the disc.
- To trim in an effective way, use trimming discs at a 30° to 40° angle to the material.
- For polishing: polish the surface in even circular motions.
Page 22 / 23