Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS
III. SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
3.1- Symbols
Explanation of symbols appearing on the tool, if applicable.
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas.
Caution! Risk of injury and/or damage and/or deterioration of product in case
of non-compliance to safety requirements
Read the instructions manual.
Class II product with double insulation
Wear protective equipment: face mask, goggles and ear protection
Wear protective gloves
Keep all your body parts away from moving parts (e.g. disc...).
Do NOT touch the moving disc.
Keep persons (esp. children) and animals away from product and working
area
Do NOT clean, lubricate or repair the tool while it is running.
Do NOT remove the protective guard or safety devices while tool is running.
Warning: electric hazard.
Disconnect product from its power source before maintenance, cleaning or
any intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further
information for its safe disposal.
III. Safety instructions
IV. Getting Started
See Fig.1
See Table 1
V. Operation
VI. Maintenance and Storage
Page 14 / 15
Publicité
Table des Matières
