Using The Timer; Starting The Stop+Go; Locking / Unlocking The Control Panel - AEG HK654070XB Notice D'utilisation

Masquer les pouces Voir aussi pour HK654070XB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
22
Operating instructions

Using the Timer

Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for one cooking
session.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• Selection of the cooking zone: touch
necessary cooking zone comes on.
• Starting the Count Down Timer: touch
minutes). When the indicator of the cooking zone flashes slower, the time counts down.
• Checking the remaining time: select the cooking zone with
cooking zone flashes faster. Display shows the remaining time.
• Changing the Count Down Timer: select the cooking zone with
• Stopping the timer: select the cooking zone with
counts backwards to
can also touch
When the time elapses, the sound operates and
off.
• Stopping the sound: touch
CountUp Timer (Count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
• Selection of the cooking zone (if more than 1 cooking zone operate): touch
again and again until the indicator of a necessary cooking zone comes on.
• Starting the CountUp Timer: touch
of the cooking zone flashes slower, the time counts up, display switches between
time elapsed (minutes)
• Checking the elapsed time: select the cooking zone with
cooking zone flashes faster. Display shows the elapsed time.
• Stopping the CountUp Timer: select the cooking zone with
switch off the timer. The indicator of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder while cooking zones do not operate. Touch
. Touch
and
flashes.
00

Starting the STOP+GO

The
function sets all cooking zones that operate to a keep warm setting.
does not stop the timer function.
locks the control bars.
• Touch
• Touch

Locking / unlocking the control panel

You can lock the control panel. It prevents an accidental change of the heat setting.
To start this function touch
EURO Appliances - euappliances.info
All manuals and user guides at all-guides.com
00
. The indicator of the cooking zone goes out. To switch off You
and
at the same time.
or of the timer to select the time. When the time elapses, the sound operates
to start this function. The indicator comes on.
to stop this function. The heat setting that you set before comes on.
. The symbol
again and again until the indicator of a
of the timer to set the time (
. Touch
00
flashes. The cooking zone switches
of the timer
comes on. When the indicator
comes on for 4 seconds.
-
00
99
. The indicator of the
touch
or
.
. The remaining time
and
. The indicator of the
and touch
or
to

Publicité

Table des Matières
loading

Table des Matières