Safety Precautions; Operating Precautions - RFC L-PAD 12C Manuel Utilisateur

SAFETY PRECAUTIONS

1. Read all precautions, in particular those related to safety, very carefully as they provide important information.
WARNING: to prevent the risk of fire or electric shock, never expose this product to rain or humidity.
2. POWER SUPPLY FROM MAINS
a. The mains voltage is sufficiently high to cause electrocution; install and connect the device before plugging it in.
b. Before powering up, make sure that all the connections have been made correctly and the voltage of your mains corresponds to
the voltage shown on the rating plate on the unit. Contact your RCF dealer if it does not.
c. The metallic parts of the unit are earthed through the power cable. The device is a CLASS I apparatus and must be plugged into
an earthed socket.
d. Protect the power cable from damage; make sure it is positioned in a way that it cannot be stepped on or crushed by objects.
e. To prevent the risk of electric shock, never open this product: there are no parts inside that the user needs to access.
3. Make sure that no objects or liquids get into the device, as this may cause a short circuit.
The device must not be exposed to drips or splashes. Do not place objects filled with liquid, such as vases, on the device. Do not place naked
flames (such as lighted candles) on the device.
4. Never attempt to carry out any operations, modifications or repairs that are not expressly described in this manual.
Contact your authorized service centre or qualified personnel should any of the following occur:
‑ The device does not work (or works anomalously).
‑ The power cable has been damaged.
‑ Objects or liquids have got into the device.
‑ The device has been subject to a heavy shock.
5. Unplug the device if it will not be used for a long time.
6. Switch the device off immediately and unplug it if emission of strange odours or smoke is noticed.
7. Do not connect the device to any equipment or accessories other than those provided for the purpose.
For suspended installation, only use the dedicated anchoring points. Do not try to hang the device using unsuitable elements or elements
which are not specific for this purpose. Also check the suitability of the support surface to which the product is anchored (wall, ceiling,
structure, etc.), and the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee
the security of the system / installation over time, also considering, for example, the mechanical vibrations normally generated by transducers.
To prevent the risk of falling, do not stack multiple units of the device unless this possibility is specified in the user manual.
8. RCF S.p.A. strongly recommends this product is only installed by professional qualified installers (or specialised firms)
who can ensure correct installation and certify it according to the regulations in force. The entire audio system must
comply with the current standards and regulations regarding electrical systems.
9. Supports and trolleys
The equipment should be only used on trolleys or supports of the type recommended by the manufacturer, where necessary. The equipment
/ support / trolley assembly must be moved with extreme caution. Sudden stops, excessive pushing force and uneven floors may cause the
assembly to overturn.
10. Numerous mechanical and electrical factors must be considered when installing a professional audio system (in addition to strictly
acoustic factors, such as sound pressure, coverage angles, frequency response etc.).
11. Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The sound pressure level which causes hearing loss is different from
person to person and depends on the exposure time. Adequate protection devices must be used to prevent potentially dangerous exposure
to high sound pressure levels. Ear plugs or protective ear muffs must be worn when a transducer capable of producing high sound levels is
used. See the technical specifications in the manual for the maximum sound pressure level.
IMPORTANT NOTES
-
To prevent the occurrence of noise on line signal cables, use screened cables only and avoid putting them close to:
-
Equipment generating high‑intensity electromagnetic fields
-
Power cables
-
Speaker lines

OPERATING PRECAUTIONS

-
Place the device away from sources of heat and always ensure an adequate air circulation around it.
-
Do not overload this product for a long time.
-
Never force the controls (buttons, knobs etc.).
-
Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of the device.
IMPORTANT NOTES
Please read this instruction manual carefully and keep it on hand for future reference before connecting and using the device. The manual
is an integral part of the device and must accompany it when it changes ownership as a reference for correct installation and use as well as
for the safety precautions. RCF S.p.A. will not assume any responsibility for the incorrect installation and/or use of the device.
All manuals and user guides at all-guides.com
WARNINGS
IMPORTANT
IMPORTANT
NOTES
IMPORTANT
NOTES
3