DeWalt D21570 Traduction De La Notice D'instructions Originale page 18

EngLIsh
ROTARY DRILL
DWD221
DUAL SPEED PERCUSSION DRILL
D21570, DWD530
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage V
AC
Type
Power input W
No load speed min -1
Maximum impact rate bpm
Maximum drilling range
mm
steel/softwood
Masonry Drilling
Optimum mm
Maximum mm
Diamond Core mm
Chuck spindle thread size UNF
Collar diameter mm
Maximum chuck capacity mm
Weight kg
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑1:
L (emission sound
PA
dB(A)
pressure level)
L (sound power level) dB(A)
WA
K (uncertainty for the
dB(A)
given sound level)
Drilling in metal
Vibration emission
2
m/s
value a =
h,D
Uncertainty K = m/s 2
Impact drilling into concrete
Vibration emission
m/s 2
value a =
h,DD
Uncertainty K = m/s 2
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
16
WALT one of the
e
D21570 DWD221 DWD530
230 230 230
1 1 1
1300 800 1300
0–1250 / 0–650 0–1250 /
0–3500 0–3500
0–56000 – 0–56000
16/40 13/38 16/40
5–10 5–10
22 – 22
127 –
13 13 13
43 43 43
13 13 13
3.0 2.3 2.8
95 74 95
106 85 106
3 5 3
7 6.7 <2.5
1.5 1.5 1.5
12.8 – 12.8
1.9 – 1.9

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
Rotary Drill
DWD221
Dual Speed Percussion Drill
D21570, DWD530
WALT declares that these products described under Technical
D
e
Data are in compliance with:
2006/42/EC, EN60745-1:2015 +AC:2015, EN60745-2-1:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
27.10.2020
a
WARNING: To reduce the risk of injury, read the
instruction manual.
WALT at
e
WALT.
e