Operating With A Power Adapter Plug; Charging The Battery; Putting The Transmitter Into Service - AUDIOLINE Watch & Care V90 Mode D'emploi

Starting Up

Operating with a power adapter plug

Connect the receiver as illustrated in the diagram. For safety reasons, only use the power adapter
plug supplied.

Charging the battery

Once you have connected the parent unit and installed its battery, press the On/Off button to turn it
on. The battery icon in the display indicates the battery status.
No battery is installed but operates using AC power, or the battery has been installed incor-
rectly.
- Install the battery. Charge without interruption (at least 30 minutes).
The battery has very little charge.
- Charge without interruption (at least 30 minutes).
The battery is fully charged.
Note:
• The battery is fully charged after 12 hours of continuous charging.
• It takes longer to charge the battery when the parent unit is turned on.
• The standby time varies depending on the sensitivity level you set, your actual use and the age
of the battery..

Putting the transmitter into service

Connect the transmitter (camera) as illustrated in the diagram. For safety reasons, only use the
power adapter plug supplied.
Mains power outlet
4
Mains power outlet