Voice Dialing; Answer Or End A Call; Call Waiting - Nokia 6301 Guide D'utilisation

Masquer les pouces Voir aussi pour 6301:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To find a name or phone number that you saved in Contacts, see "Find a contact," p. 28.
Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode. To call a
number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch-dialing keys, 2 to 9. See "1-touch dialing,"
p. 30. Call the number in either of the following ways:
• Press a 1-touch-dialing key, then the call key.
• If 1-touch dialing is set to On, press and hold a 1-touch-dialing key until the call begins.
See 1-touch dialing in "Call," p. 38.

Voice dialing

To make a phone call, say the name that is saved in the contact list of the phone. Voice
commands are language-dependent. To set the language, select Menu > Settings > Phone >
Language settings > Recognition lang. and your language before using voice dialing.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or press and hold the volume
down key. A short tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a list with
matches is shown. The phone plays the voice command of the match on the top of the
list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is similar to voice dialing.
See "Voice commands," p. 39.

Answer or end a call

To answer an incoming call, press the call key.
To end the call or decline an incoming call, press the end key.
To mute the ringing tone, select Silence.

Call waiting

To answer the waiting call during an active call, press the call key. The first call is put on
hold. To end the active call, press the end key.
To activate the Call waiting function, see "Call," p. 38.
18

Publicité

Chapitres

Table des Matières
loading

Table des Matières