Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Operation
Check the transmitter and receiver are working properly each time before the equipment is put into
operation.
Switching the transmitter on/off
1. Press and hold the ON/OFF button until the light on the button turns on.
2. To turn the Baby unit off, press and hold the ON/OFF button for approx. 2 seconds. The light will turn off.
Night vision
The transmitter is equipped with infrared diodes. This enables the transmission of pictures from areas
which are not illuminated. The night vision function is activated automatically when the light conditions
make it necessary.
When the night-time vision function is activated, the screen display on the receiver turns to
black and white.
Adjusting the volume
You can adjust the loudspeaker volume from Level 1 to Level 5. The default setting is Level 3.
1. Press the
or
Playing lullabies
The Baby unit has five lullabies that can be played to gently soothe your baby. The total lullaby playback time is
about 15 minutes and it starts from where you stopped it last time.
1. Press the
button to play.
2. Press the
button to skip to the next lullaby.
3. Press the
button to stop playback.
To pair a Baby unit to the Parent unit
Firstly, make sure the Baby and Parent units are turned on. You have 60 seconds to complete the pairing
process once the Parent unit display shows the prompt.
1. Press
on the Parent unit.
2. Press
or
to highlight PAIR/UNPAIR CAM, then press
3. Press
or
4. Press
or
to choose a Baby unit slot, then press
5. Press and hold the
button of the new Baby unit will flash red and green alternately.
6. When pairing has been successful, the screen will display the image from the newly paired Baby unit. The
light on the ON/OFF button of the new Baby unit will turn red when it is powered by AA batteries or green
when powered by the power adaptor.
button to increase or decrease the loudspeaker volume.
again to select Pair new CAM.
and
buttons for 5 seconds on the new Baby unit. The light on the ON/OFF
or
.
to confirm.
GB
9
Publicité
Table des Matières
