Pioneer SC-LX83 Guide Rapide page 39

Basic playback
2 Select 'System Setup', then press ENTER.
3 Select 'Other Setup', then press ENTER.
4 Select 'Pairing Bluetooth Device', then press
ENTER.
5 Select the 'Passcode' setting you want.
Select the same passcode as the Bluetooth wireless
technology device you wish to connect.
• 0000/1234/8888 – Select the passcode from these
options. These are the passcodes that can be used in
most cases.
• Others – Select to you use a passcode other than
those mentioned above. Use / to select a number
and / to move the cursor.
6 Follow the instructions displayed on the GUI screen
to conduct pairing with the
technology device.
Switch on the Bluetooth wireless technology device that
you want to make pairing, place it near the receiver and
set it into the pairing mode.
7 Check to see that the Bluetooth ADAPTER is
detected by the Bluetooth wireless technology device.
When Bluetooth wireless technology device is connected:
CONNECTED appears in the receiver display.
When Bluetooth wireless technology device is not
connected:
Go back to the passcode setting in step 5. In this case,
perform the connection operation from the side of the
Bluetooth wireless technology device.
8 From the Bluetooth wireless technology device list,
select Bluetooth ADAPTER and enter the Passcode
2
selected in the step 5.
Listening to music contents of a Bluetooth
wireless technology device with your system
1 SC-LX83 only: Set the remote control operation
selector switch to SOURCE.
2 Press ADAPTER on the remote control to switch the
receiver to ADAPTER PORT input.
3 From the Bluetooth wireless technology device,
perform the operation to connect to the Bluetooth
ADAPTER.
Note
1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
2 Passcode may in some case be referred to as PASSKEY or PIN code.
3 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER PORT input is selected.
4 • Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the remote control buttons.
• It must be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
Bluetooth
wireless
1
3
4 Start playback of music contents stored on the
Bluetooth wireless technology device.
This receiver's remote control buttons can be used for
basic playback of files stored on Bluetooth wireless
4
technology devices.
SC-LX83:
SOURCE
TV RECEIVER
CH VOL
VOL
SC-LX73:
DIRECT STEREO
HDD DVD
THX PHASE CTRL
TV / DTV MPX
HDMI OUT
1 2
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Pioneer Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
STATUS PHASE CTRL CH LEVEL
THX MPX PQLS MEMORY
AUTO/ALC/
DIRECT STEREO STANDARD ADV SURR
PGM MENU
STANDARD ADV SURR
STATUS
PQLS
AUDIO
3
All rights reserved.
04
39
En