Safety and Instructional Decals
Safety and instruction decals are located near areas of potential danger. Replace damaged or
missing decals.
1. Auger drive—squeeze the lever to engage; release the lever
to disengage.
2. Warning—read the Operator's Manual.
3. Cutting/dismemberment hazard of hand or foot, auger—keep
away from moving parts; keep all guards and shields in place;
shut off the engine and wait for the auger to stop before
leaving the machine; remove the ignition key and read the
instructions before servicing or performing maintenance.
Order Part No. 131-5916
1. Cutting/dismemberment hazard of hand or foot, auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
Order Part No. 131-5921
131-5914
131-1785
4. Thrown object hazard—keep bystanders a safe distance
away from the snowthrower.
5. Self-propel drive—push down on the handle to engage the
self-propel drive.
1. Insert the key.
2. Prime the engine 3 times.
3. Engage the choke.
4. Pull the starter cord.
5. Once the engine is running, disengage the choke.
4
1
2
x 3
3
4
5
120-9805
120-9805