Functions Menu; Excessive Temperature Alarm; Child Lock Function; Eco Mode Function - AEG A83270GT Notice D'utilisation

Congélateur-bahut
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

24
Control panel

Functions Menu

By activating the Function button the functions menu is operating. Each function could be
confirmed by pressing Confirmation button . If there is no confirmation after some seconds
the display will go out from the menu and return in normal condition. The following func-
tions are indicated:

Excessive temperature alarm

Child Lock function

Eco Mode function

Frostmatic function
Drinks Chill function
Excessive temperature alarm
An increase in the temperature in a compartment (for example due to an power failure) is
indicated by:
• flashing temperature
• flashing of the icon
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
When you press the Confirmation button to de-activate the alarm, the highest temperature
reached in the compartment appears on indicator
Then it returns on the normal operation showing the temperature of the selected com-
partment.
During the alarm phase, the buzzer can be switched off by pressing the Confirmation button.
Possible causes of alarm:
• Large volume of fresh food was inserted.
• The lid has been left open for a long time.
• Any other defect of the system. See the Table in "Troubleshooting".
Child Lock Function
The Child Lock function is activated by pressing the Function button (several times if nec-
essary) until the corresponding icon appears
You must confirm the choice by pressing the Confirmation button within few seconds. You
will hear the buzzer and the icon remains lighted. In this condition any possible operation
through the keys does not cause any change as long as this function is activated.
It is possible to de-activate the function at any time by pressing the Function button until
the corresponding icon will flash and then the Confirmation button.
Eco Mode Function
The Eco Mode function is activated by pressing the Function button (several times if nec-
essary) until the corresponding icon appears
You must confirm the choice by pressing the Confirmation button within few seconds. You
will hear the buzzer and the icon remains lighted.
All manuals and user guides at all-guides.com
for some seconds.
.
(or setting the temperature at -18°C).

Publicité

Table des Matières
loading

Table des Matières