Functions Menu; Excessive Temperature Alarm - AEG A82300HLW0 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

26
Control panel
By pressing the Temperature regulation button the current temperature setting flashes on
the indicator and by pressing the button again it is possible to change it.
You confirm the choice of the temperature by pressing the Confirmation button. The tem-
perature indicator shows again the inside compartment temperature.
The set temperature will be reached within 24 hours.
After a long period out of use it is not necessary to set again the temperature because it
remains stored.
WARNING!
During the stability period by the first starting the temperature displayed can not corre-
spond to the setting temperature. During this time it is possible that the temperature dis-
played is different than the setting temperature.
Difference between the temperature displayed and temperature setting is normal. Especially
when:
• a new setting has recently been selected
• the door has been left open for a long time
• warm food has been placed in the compartment
Difference until 5°C inside the compartment are quite normal.
During normal functioning the indicator shows the warmest temperature inside the com-
partment.

Functions Menu

By activating the Function button the functions menu is operating. Each function could be
confirmed by pressing Confirmation button . If there is no confirmation after some seconds
the display will go out from the menu and return in normal condition. The following func-
tions are indicated:

Excessive temperature alarm

Child Lock function
Eco Mode function
Frostmatic function
Drinks Chill function
Excessive temperature alarm
An increase in the temperature in a compartment (for example due to an power failure) is
indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
When you press the Confirmation button to de-activate the alarm, the highest temperature
reached in the compartment appears on the temperature indicator for some seconds.

Publicité

Table des Matières
loading

Table des Matières