Playback - TKH TR0802P Guide De Démarrage Rapide

Quick start guide - Network Video Recorder - TR0802P & TR1602P
Option 2:
Step 1 Go to Storage > Recording Schedule.
Step 2 Select a camera.
Step 3 Check the Enable Schedule.
Step 4 Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion | Alarm, Motion &
Alarm, Event, etc.
Step 5 Select a day and click‐and‐drag the mouse on the time bar to set the record schedule.
Step 6 Click Apply to save the settings.
3.10 Playback
The recorded video files on the hard disk can be played back in the following modes: instant playback, all‐day playback
for the specified channel, and playback by normal/smart/custom /sub‐periods/external file. Refer to the User Manual
for detailed information.
Step 1 Enter the playback mode (
Step 2 Check one or more cameras in the camera list to start playing the video.
Step 3 Select a date in the calendar.
Use the toolbar in the bottom part of playback interface to control the playing and realize a series of

operations.
Click the channel(s) to perform simultaneous playback of multiple channels.

Network Video Recorder Quick Start Guide
Figure 3‐7 Record Schedule
).
19
19
EN