EN
We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect your product.
Step 2 In the IP Camera Activation text field, enter the password to activate the IP camera (s) connected to the device.
Step 3 Click OK to save the password and activate the device.
After the device is activated, you should properly keep the password.
3.3 Configure Unlock Pattern for Login
For the admin user, you can configure the unlock pattern for device login.
Step 1 After the device is activated, you can enter the following interface to configure the device unlock pattern.
Step 2 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done.
Connect at least 4 dots to draw the pattern.
Each dot can be connected for once only.
Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully.
Quick start guide - Network Video Recorder - TR0802P & TR1602P
Network Video Recorder Quick Start Guide
Figure 3‐2 Draw the Pattern
14
14