Enter Wizard To Configure Quick Basic Settings; Network Settings - TKH TR0802P Guide De Démarrage Rapide

3.5 Enter Wizard to Configure Quick Basic Settings
EN
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts
once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard. Follow the
guide of the Setup Wizard to configure the system resolution, system date/time, network settings, HDD management,
record settings, etc.
Network Settings
3.6
Purpose:
Network settings must be properly configured before you operate device over network.
Step 1 Go to System > Network > TCP/IP.
Quick start guide - Network Video Recorder - TR0802P & TR1602P
Network Video Recorder Quick Start Guide
Figure 3‐4 Wizard
16
16