Kärcher VC 6300 Mode D'emploi page 14

Turn off the appliance and disconnect
the mains plug.
Illustration
Push the take-up cable button. The cable
will pull itself automatically into the appli-
ance.
Hang the floor nozzle on the backside of
the appliance into the parking holder,
and push into the pause position.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Cleaning the device
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
Clean the dust chamber with a dry wipe
cloth/ dust brush.
Replacing the filter bag
Order no. 6.904-329
Contents: 5 filter bags with cap and 1 engine
protection filter.
Note: Separate the telescopic suction pipe
from the handle to see the filter change indi-
cator.
Illustration
If the filter change indicator in the cover
glows red, then please change the filter
bag.
Use the closing lever and open the lid.
Illustration
Unlock the holder of the filter bags and
pull towards the outside.
Illustration
Close the filter bag using the closing flap,
remove the filter bag and dispose it off.
10
English
Finish operation
Maintenance and Care
Illustration
Close the lid only, if there is a filter bag in-
serted. After picking up small dust particle
(as for example plaster, cement etc) clean
the motor protection filter, change if neces-
sary.
Motor protection filter: change before the
last filter bag is removed from the filter bag
package.
Illustration
Illustration
Transport, storage
Hold the appliance at the carrying handle
when you want to transport it and store it
in dry rooms.
Note: It is recommended that you first
completely push in the telescopic suction
pipe.
Push the new filter bag into the support
until the stop. First press the flap down-
wards; then push the holder into the cas-
ing and lock it at the appliance casing.
Caution
Change the motor protection filter
The motor protection filter is behind the
inserted filter bag. Change the motor
protection filter before you insert the filter
bag.
Unlock the frame and remove.
Remove the lower part of the frame, take
out old engine protection filter and dis-
pose it off. Insert the new engine protec-
tion filter in the frame and replace the
lower part of the frame.
Insert and click the frame into its place.