Baxtran BR 15 Mode D'emploi page 53

GRAVITY
LF 7
*Introduce the gravity of your zone before doing the first calibration.
*Introduce the gravity of destination after doing the calibration.
*The value of the gravity will be denied if it is bigger than 9.83217 ( gravity of the pole) or lower than 9.78031 ( gravity of
the equator).
Value of factory: 9.8035
DISPLAY
• Press the key
LF 7
automatically.
-00-
• The screen is going to show the number of pre-calibration during one second.
9.8035
• Press the key
• Use the keys
9.8035
gravity ( press ESC to exit from the configuration and go back to the menu LF7)
INITIAL ZERO
LF 8
SEtZ Y resets of the point of zero every time that the scale is begun again.
SEtZ n resets of the point zero OFF
DISPLAY
• Press the key
LF 8
automatically.
• Use the key
SetZ Y
from the configuration and go back to the menu LF8)
LF 8
• Use the keys
DESCRIPTION AND SEQUENCE OF USE
to continue or the key
to continue.
, and
DESCRIPTION AND SEQUENCE OF USE
to start or the key
and then the key
, and then the key
to exit from the menu and the scale will start again automatically.
to exit from the menu and the scale will start again
0 ~ 9
, and then the key
to exit from the menu and the scale will start again
to choose the mode of zero initial ( press the key ...to exit
to continue with other adjustments o press the key
USER'S MANUAL BR15
to introduce the value of
EN
53