Baxtran BR 15 Mode D'emploi page 50

LF 2
262144
100001
000000kg
d 0.0kg
div 01
LF2
LINEAL CALIBRATION
Up to six steps of calibration W0 ~W6
Make sure that the plate of the scale is empty before starting the calibration.
Press the key
The previous points of calibration will be removed and the message CLEAR is going to appear on the screen.
Press the key
Press the key
Press the key
Press the key
DISPLAY
LF3
W0
50
•Press the key to start and display the internal value. Press
will automatically restart.
•Press the key To continue with the configuration. (press the key
ration and go back to the menu LF2).
•Use the keys ,
OF WEIGHT . (press the key
•Use the keys ,
MUM WEIGHT. press the key
•Use the keys ,
from the configuration and go back to the menu LF2).
•Use and then
go back to the menu LF2).
•Use , and then
exit from the menu and the scale will begin again automatically).
LF 3
for the first point of calibration.
to proceed with the next point of calibration.
to go back to the previous point of calibration.
to keep everything.
to finish the calibration and go back to the menu
•Press the Key to start or the key
tically
•Press the Key to calibrate the zero.
( press the key to exit from the calibration and go back to the menu LF3)
0 ~ 9
and , and then press the key
to exit from the configuration and go back to the menu LF2).
0 ~ 9
and , and then press the key
to exit from the configuration and go back to the menu LF2).
and Then To move the decimal point ( press the key
to change the step. (Press the key
To continue with the other configuration or press the key
LF3.
DESCRIPTION AND SEQUENCE OF USE
To exit the menu and the scale will start again automa-
USER'S MANUAL BR15
to exit the menu and the scale
to exit from the configu-
to choose the UNITS
to choose the MAXI-
To exit
To exit from the configuration and
EN
to