Before First Use - AEG FAVORIT 45020 VI1P Notice D'utilisation

24 www.aeg.com
the indicators of buttons
3.
Press button
•
The indicators of buttons
and
•
The indicator of button
tinues to flash.
• The end indicator comes on.
4.
Press button
goes off, the acoustic signals are de-
activated.
5. Deactivate the appliance to confirm
the setting.
How to activate the acoustic signals
1. Refer to 'How to deactivate the
acoustic signals', step (1) through (3).

6. BEFORE FIRST USE

1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
6.1 Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
and start to flash.
.
go off.
. The end indicator
Water hardness
French
degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
2.
, Press button
•
The indicators of buttons
and
•
The indicator of button
tinues to flash.
• The end indicator is off.
3.
con-
Press button
comes on, the acoustic signals are
active.
4. Deactivate the appliance to confirm
the setting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
mmol/l Clarke
degrees
8.4. - 9.0 58 - 63
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
,
go off.
con-
. The end indicator
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
1) 9
2
1) 8
2
7
1)
2
1) 6
2
1) 1)
2 5
1 4