Télécharger Imprimer la page

Oase ProfiClear Guard Notice D'emploi page 12

Masquer les pouces Voir aussi pour ProfiClear Guard:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
- GB -
-
GB
-
Translation of the original Operating Instructions
Information about these operating instructions
Welcome to OASE Living Water. You made a good choice with the purchase of this productProfiClear Guard.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-
ures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-
ures are not taken.
Important information for trouble-free operation.
A
Reference to one or more figures. In this example: Reference to Fig. A.
Scope of delivery
B
Quantity Description
1
1
Level control unit
2
1
Solenoid valve
4
1
Level sensor
6
1
Seal for solenoid valve socket/solenoid valve plug
7
1
Bag containing fastening material
8
1
Solenoid valve socket
Intended use
ProfiClear Guard, in the following termed "unit", and all other parts from the delivery scope may be used exclusively as
follows:
− For maintaining the water level of a pond by topping it up with water from the mains water supply (drinking water).
The following restrictions apply to the unit:
− The drinking water may only enter the pond via a free flowing outlet (with air gap separation).
− Ensure that the pond has an overflow that drains the excess water into the sewer system.
− Operation under observance of the technical data.
− The solenoid valve may not be used as a safety valve.
− Only operate the unit with the provided plugs/connectors and cables.
12

Publicité

loading