Publicité
Les langues disponibles
Les langues disponibles
the alarm by the ON/OFF of symbol
seconds, it will automatically return to current time display.
SNOOZE FUNCTION
1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. OR when alarm is ringing, press "
function. And the alarm will repeat in 5 minutes. The "
will be flashing on screen to indicate the snooze mode. Press any
other button except top button to exit the snooze mode. And the
alarm will restart next day.
3. When alarm rings, the ascending "Bibi" alarm sound will last for 2
minutes if no operation.
PLACEMENT INSTRUCTION
BALDR sensors are sensitive to surrounding environmental
conditions. Proper placement of both the main unit and outdoor
sensor are critical to the accuracy and performance of this product.
Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help ensure an
accurate indoor temperature measurement, be sure to place the
Main unit away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant for water splashes and is designed for
general outdoor use, however, to extend its life place the sensor
in an area protected from direct weather elements. The best
location is 4 to 8 feet(1.2 to 2.4 meters) above the ground with
permanent shade and plenty of fresh air to circulate around the
sensor.
If on operation for 20
" button to activate snooze
15
" symbol
Publicité
