BALDR B0360WST2H2PR-V2 Mode D'emploi page 11

The default value is :
Pressure Unit
hPa/mb
Temperature
Unit
℃
RF SIGNAL RECEIVING
●
for 3 minutes. If all 3 channels signal received within 3 minutes or
receiving window ends, it will enter into DCF signal receiving window.
●RF signal will not receive during the RCC reception,please exit the
RCC receiving first by pressing the "SET/
RCC RECEIVING
1. After RF signal receiving, it will start searching radio signal for 7
2. There are daily automatic DCF receiving at 1:00AM,2:00 AM, 3:00
AM, 4:00AM, 5:00AM. It will first start receiving DCF time at 1:00
AM, 2:00AM, 3:00AM each day. If DCF time is not received till
3:00AM, it will start receiving again at 4:00AM and 5:00AM. If the
time is not successfully received at 5:00AM, there will be no
receiving the day, It will start searching for signal at 1:00AM the
next day.
Weekday
Display Time
Language
0:00
GER
(24H format)
RCC
Time zone
Function
ON
Key tone
ON
Alarm Time
0hr
AM6:30(OFF)
"Button.
11
Display Date
2020.01.01