Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
The assembly of the Ermax undertray involves the original indicators' removal.
Fitting kit
- 2 screws BHC Ø6×15 steel small head
- 2 screws BHC Ø6×30 black big head
- 5 screws BHC Ø5×15 black big head
- 3 steel washers Ø5 L
- 2 plastic spacers Ø6×10×20
- 1 plate lighting EDP05
- 1 reflector support SDC02
Fitting instructions
- The stainless steel grid is an option and you can fit it at the air intake level with silicone.
- Remove the pilot's saddle. Unplug the original indicators and plate lighting, then take off the mud flap. Keep
the four original nuts that secure the mud flap.
- Remove both original screws shown on the picture below :
- Refit the tail light at the locations shown below thanks to two original nuts and two steel screws BHC Ø6×15
small head :
Think to bring blinkers.
For a compliant mounting, refer to enclosed instructions.
ADAPTABLE ON MT 09/ FZ9 2014 → ∞
- 1 stainless steel grid 3cm × 10 cm
- 3 self-locking nuts Ø5
- 3 plastic washers Ø5
- 2 plastic washers Ø6
- 1 fitting bracket ABS
- 1 metal support SUP09
FITTING INSTRUCTIONS
ERMAX UNDERTRAY
Estimated fitting time : 1h30
Not compatible with Ermax
taillight surround
Publicité
