Worx WT344 Notice Originale page 9

1. LOCKING SLEEVE
2. DEPTH GAUGE
3. GREASE BOX COVER
4. ON/OFF SWITCH
5. HAMMER OR DRILLING ACTION SELECTOR SWITCH
6. HAMMER OR CHISEL ACTION SELECTOR SWITCH
7. VARIABLE SPEED CONTROL
8. SDS DRILL BITS*
9. SPANNER
10. KEY CHUCK WITH ADAPTOR, CHUCK KEY*
11. PLASTIC CONTAINER GREASE*
12. DUST COVER*
13. CHISELS (POINT & FLAT)*
14. AUXILIARY HANDLE
*Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type WT344 (330~359-designation of machinery, representative of Rotary hammer)
Voltage
Power input
No load speed
Impact rate
Impact energy
Chuck type
Max drilling capacity
Protection class
Machine weight
Rotary hammer
Steel
Masonry
Wood
220-240 V~50/60 Hz
1250 W
0-750 /min
0-3700 /min
5.0 J
SDS-plus
13 mm
32 mm
40 mm
/II
6.1 kg
EN
9