Vicks Double Confort VWC775 Serie Manuel D'instructions page 6

USING YOUR HUMIDIFIER
VWC775 Manual Control Panel
1.
Power: Press Power Button
Unit defaults to cool mist, high output setting.
2.
Mist Temperature: Press Cool
selectors to toggle between cool and warm mist
output settings.
The Mist Output LEDs and light around the Mist
Temperature buttons will be blue when unit is in cool
mist mode and orange when in warm mist mode.
NOTE: Cool mist is immediate but please allow up to
5 minutes or more for water to boil to produce warm
mist. It is normal to hear the sound of the water
boiling occasionally as more water drains into the Boiling Chamber.
3.
Mist Output Level: Press the desired Mist Temperature icon (
to cycle through low, medium and high mist output settings. One light for
low, two lights for medium and three lights for high.
The higher the output setting, the more moisture enters the air.
The lower the output setting, the longer the run time before needing to be refilled.
4.
Reset: The Reset Light has several functions. See next section for details.
RESETTING YOUR HUMIDIFIER
Situation
Water Tank Removed
Tank Empty
Mineral Buildup on Heating Element
2-WAY MIST OUTLET
This humidifier features a 2-Way Mist Outlet that allows
you to direct mist in in two directions. Positioning both
openings in the same direction results in a strong
mist plume into the room. Separating the mist outlets
allows for pointing the mist in two directions for wider
distribution.
6
to turn on.
or Warm
Reset Light
Illuminates Orange
Illuminates Orange
Blinks Red
Mist Output Level
Cool Mist
Warm Mist
Power Button
Reset Light
VapoPad Door
)
How to Reset
Replace Tank on Base
(must contain water)
Fill Tank and Replace on Base
See Cleaning Instructions
VWC775
Manual Control Panel