Festo CPX Serie Manuel D'utilisation page 25

CTEL system
Parameterisation
– Module parameters
– Diagnostic behaviour
– Tool change mode
1)
– Failsafe per channel
1)
– Forcing per channel
1)
– Idle mode
Reverse polarity protection
Diagnostics
Module-oriented diagnostics
Undervoltage/short-circuit modules
Communication error
1)
If supported by the respective CPX bus node. Example:
(EtherCAT), Rev.6 does not support an idle mode.
Festo CPX-CTEL-Z6 1411a English
per channel
Separate for each system and
load voltage, not separated per
I-port
Undervoltage PS
Undervoltage PL (over device)
Communication error
Short-circuit PS/PL
Device error
CPX-FB38
25