Festo CP FB6-E Notice Simplifiee page 12

CP FB6-E
2
Configuration
CAUTION
The node contains elements which are liable to damage by
electrostatic charges. The node can also be destroyed if the
contact surfaces of plug connectors are touched, or if the
regulations for handling electrostatically vulnerable compo-
nents are not observed.
Please observe the following when configuring:
1. Switch off the operating voltage.
2. Open the cover for the DIL switch.
3. Switch valve test on/off.
4. Select error messages.
5. Set manufacturer-specific addressing.
6. Fix the cover for the DIL switch.
12
9709 NH