Kohler SDMO VERSO 50 Manuel D'utilisation page 47

2- 5 M4 - General setup
The general setup is composed by 3 submenus:
A) Display setup: Submenu that contains all the parameters settings of the screen: language, contrast, etc.
B) Clock setup: Submenu with the general settings about the clock: date, time and day of the week.
C) Security setup: Submenu to set the passwords for different levels that lock and unlock the various menus
2- 5.1 M4.1 - Display setup
POS. NAME
A Language
B Backlight
C Return to default
D Contrast
E Cyclic alarms
F Reset events log
2- 5.2 M4.2 - Clock setup
POS. NAME
A Year
B Month
C Day
D Day of the week
E Hours
F Minutes
G Update clock
H Current setting
VERSO 50_v1.0.27_EN
You select the language. On board are available the following
languages: English, Spanish, French, Portuguese and Russian.
And it's possible to request and install any language with any
type of character.
If no operations are done, after this time the display backlight
turns off. It returns on automatically when an events occurs.
It is the time after which the controller automatically returns to
the standby page (Mains 1) if no buttons are pressed.
To set the display contrast preferred for the VERSO 50.
It is the time of the cyclic indication of the active alarms. The
new parameter is active at the next system startup.
If you select and confirm this parameter, you reset the events
log.
To set the year
To set the month
To set the day
To set the day of the week from Sunday to Saturday
To set the current hour
To set the current minute
Used to confirm the adjusted date/clock, it updates the current time.
To do it, you must select the area using the drive arrows and then
confirm by the "i" drive button.
It shows current date and clock set.
33502027401_3_1
DESCRIPTION
DESCRIPTION
RANGE OF DEFAULT
VALUES SETTINGS
EN – ES – FR
EN
– PT – RU
0-255 [s] 60
Off-250 [s] Off
0-5 0
0-255 [s] 3
- -
RANGE OF DEFAULT
VALUES SETTINGS
0-99 12
0-12 1
0-31 1
Sun - Sat Sun
0-23 12
0-59 0
- -
- -
page 15/24