Storage; Malfunctions - SilverCrest SPW 1000 B2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ATTENTION! DAMAGE TO PROPERTY!
Do not use abrasive cleaners or scouring
pads, if so the anti-stick coating on the wok
pans 6 and the cooking plate 1 will be
scratched and become unusable!
Once you have removed the party wok power
cable 3 from the mains socket and the wok pans 6
and cooking plate 1 have cooled down ...
1) Use the plastic spatulas 4 to remove all
remaining food residue from the wok pans 6.
2) Thoroughly rinse the wok pans 6, the sauce
dishes 2, the plastic spatulas 4, the wooden
spatula 7 and the ladle 5 in warm water
with a mild dishwashing detergent. Do not use
any abrasive cleaners or scouring pads, other-
wise the non-stick surfaces of the wok pans 6
will be scratched and become unusable!
3) Rinse any remaining detergent off with clear
water.
4) Clean the cooking plate 1 with a moist
sponge or cloth.
5) Ensure that all parts are completely dry before
operating the party wok again.
SPW 1000 B2

Storage

Remove the power cable 3 from both the wall
socket and the cooking plate 1 when the appli-
ance is not being used.
Allow the party wok and its components to cool
down completely before storing them away.
Wrap the power cable 3 around the cable
retainers on the underside of the appliance.
Always keep the party wok outside the reach of
children in a dry and dust-free place

Malfunctions

Should the party wok not function or not function
correctly ...
Check to ensure that the power cable 3 is
correctly connected to the cooking plate 1.
Check to ensure that the power cable 3 is
correctly connected to the wall socket.
Check to ensure that the wall power socket to
which the party wok is connected is "live" by
connecting another appliance to it.
GB
33

Publicité

Table des Matières
loading

Table des Matières