Resol VBus/LAN Mode D'emploi page 23

The Web interface is not designed for controller access,
but for adjusting the network settings of the VBus
interface adapter.
By means of the Settings menu of the Web interface, the
following settings can be adjusted:
• Assign a static IP address to the VBus
adapter
• Change the name and the password of the VBus
interface adapter
• Reset the VBus /LAN interface adapter
®
• Select a menu language for the Web interface
• Change the UPnP-port number
Changing the password
The default password for the VBus
is „vbus". It can be changed in order to prevent unautho-
rised access.
To change the password, proceed as follows:
Î Click on Settings in the Web interface
Î Enter the desired password into the VBus Password
input field
Î Click on Update Settings
The new password is saved.
Accessing the device is not possible without the correct
password.
Î Note down the new password and keep it carefully!
/LAN
®
/LAN interface
®
/ LAN
®
/ LAN interface adapter
®
If the password is lost, the device has to be reset to the
factory settings. For more information see chap. „Reset"
auf Seite 24.
Fig. 8
Changing the module name
In the same menu, a new module name can be assigned to
the VBus / LAN interface adapter. The device will be displa-
®
yed with its module name in the network.
Î Enter the desired name into the Module Name input
field
Î Click on Update Settings
The new module name is saved.
23