System Access Via Rsc-Software - Resol VBus/LAN Mode D'emploi

System access via RSC-Software

With the RESOL ServiceCenter Software, the controller
can be configured and system data can be recorded via the
VBus /LAN interface adapter. A CD-ROM containing the
®
RSC software is included with the device.
Î Install the software on at least one computer in the
network
For more information about the installation see the RSC
software manual.
Data logging
Fig. 1
In order to log data via the RSC software, proceed as
follows:
Î Start the RESOL ServiceCenter software
Î Click on the VBus Logging
Î At the bottom of the page, in the drop-down menu
Port name, select Connect to VBus/LAN (Fig. 2)
The window RESOL Device Discovery appears (Fig. 3)
20
tab (Fig. 1)
Fig. 2
Fig. 3
Î In the upper-hand menu, select the VBus
face adapter
Î Type the password into the VBus/LAN Remote
Password input field (see chap. „Network settings"
on page 22)
Î Click on OK
/LAN inter-
®