Homologations, directives et normes
11
11.3
11.4
11.4.1
610.00260.50.000 · 07.2014
Normes et directives
Applicables spécifiquement :
▪ Directive sur la compatibilité électromagnétique (directive 2004/108/CE du
conseil EN 61800-3:2004)
▪ Directive sur les basses tensions (directive 2006/95/CE du conseil EN 61800-
5-1:2003)
▪ Liste des normes des produits
Homologation d'après UL
UL Specification (English version)
Maximum Ambient Temperature (without models Suffix S10):
Electronic
INV MA 2 0.37
INV MA 2 0.55
INV MA 2 0.75
INV MA 2 1.10
INV MA 4 1.50
INV MB 4 2.2
INV MB 4 3.0
INV MB 4 4.0
INV MC 4 5.5
INV MC 4 7.5
INV MC 4 5.5
INV MC 4 7.5
INV MC 4 5.5
INV MC 4 7.5
INV MD 4 11.0
INV MD 4 15.0
INV MD 4 18.5
INV MD 4 22.0
Maximum Surrounding Temperature:
Electronic
INV MC 4 5.5
INV MC 4 7.5
Required Markings
Enclosure intended for use with field-installed conduit hubs, fittings or closure
plates UL approved in accordance to UL514B and CSA certified in accordance to
C22.2 No. 18, environmental Type 1 or higher.
The INVEOR INV MC 4 with suffix S10 is for use in Pollution Degree 2 only.
Internal Overload Protection Operates within 60 seconds when reaching 150 % of
the Motor Full Load Current
Suitable for use on a circuit capable of delivering not more than 5 kA rms symme-
trical amperes, 230 Volts for INV Mx 2 or 480 Volts for INV Mx 4, maximum when
protected by fuses.
"Warning" – Use fuses rated 600 V/50 A for INV MA 2 only.
Adapter
ADP MA WDM
ADP MA WDM
ADP MA WDM
ADP MA WDM
ADP MA WDM
ADP MB WDM
ADP MB WDM
ADP MB WDM
ADP MC WDM
ADP MC WDM
ADP MC WDM
ADP MC WDM
ADP MC WDM
ADP MC WDM
ADP MD WDM
ADP MD WDM
ADP MD WDM
ADP MD WDM
Adapter
ADP MC WDM
ADP MC WDM
72
/
78
Ambient
Suffixe
45° C
45° C
45° C
40° C
40° C
45° C
40° C
35° C
40° C
35° C
55° C
50° C
50° C
45° C
55° C
50° C
40° C
35° C
Ambient
Suffixe
40° C
35° C
© Gardner Denver Deutschland GmbH
-
-
-
-
-
-
-
-
Gx0
Gx0
Gx1
Gx1
Gx2
Gx2
-
-
-
-
S10
S10