Ec Declaration Of Conformity - For Battery Operated Products - Husqvarna HA110 Manuel D'utilisation

EC Declaration of Conformity - for
gasoline operated products
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the hedge trimmer
attachments Husqvarna AB HA110 (ONLY VALID for
Petrol products) and HA850, with serial numbers dating
from 2019 onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with
the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• of June 8, 2011 "on the restriction of use of certain
hazardous substances" 2011/65/EC
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
The following standards have been applied:
EN ISO 12100:2010, ISO 10517:2009
0404, RISE SMP Svensk Maskinprovning AB, has
carried out EC type examination in accordance with the
machinery directive's (2006/42/EC) article 12, point 3b.
The certificate for EC type examination in accordance
with annex IV, have the number: SEC/14/2416
Huskvarna 2019-06-24
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
EC Declaration of Conformity - for
battery operated products
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the hedge trimmer
attachment Husqvarna HA850 attachment with power
unit Husqvarna 325iLK with serial numbers dating from
2019 onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the
requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• of June 8, 2011 "on the restriction of use of certain
hazardous substances" 2011/65/EC
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
820 - 002 -
EC Declaration of Conformity
The following standards have been applied:
IEC 62841-4-2, EN 50581:2012
RISE SMP Svensk maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden has performed voluntary
type examination on behalf of Husqvarna AB. The
certificate is numbered: SEC/14/2416
RISE SMP Svenska Maskinprovning AB has also
verified agreement with the appendix V of the council's
directive 2000/14/EC. The certificate have the number:
01/094/028
For information relating to noise emissions, refer to
Technical data on page 11 .
Huskvarna 2019-06-24
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
13