Transportation, Storage And Disposal; Technical Data - Husqvarna 325L Manuel D'utilisation

Check
Spark plug.
The engine starts but stops again
Check
Fuel tank
Air filter
Transportation and storage
• Let the product cool before transportation or storage.
• Remove the spark plug cap before long-term
storage.
• Attach the product during transportation. Make sure
that it cannot move.

Technical data

Engine
Cylinder displacement, cu.in/cm
Idle speed, rpm
Recommended max. speed, rpm
Power / Max. engine output, acc. to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed of output shaft, rpm
18
Possible cause
The spark plug is dirty or wet.
The spark plug electrode gap is incorrect.
The spark plug is loose.
Possible cause
Incorrect fuel type.
The air filter is clogged.

Transportation, storage and disposal

Technical data
3
Procedure
Make sure that the spark plug is dry and
clean.
Clean the spark plug. Make sure that the
electrode gap is correct. Make sure that the
spark plug has a supressor.
Refer to technical data for correct electrode
gap.
Tighten the spark plug.
Procedure
Empty the fuel tank and fill it with cor-
rect fuel.
Clean the air filter.
• Make sure that there is no risk of fuel leaks, fuel
fumes, sparks or flames during transportation and
storage.
• Clean and do servicing on the product before long-
term storage.
325L
A05328CSHV
1.68/27.6
2800 - 3200
8000
0.9/1.2 @ 8000
Yes
7200
882 - 001 - 10.10.2018