Table des Matières
Publicité
100
Active
200
Active
400
Active
4094
Inactive
5. Validez la configuration du protocole LLDP (Link Layer Discovery Protocol)
show lldp neighbors
Loc PortID
---------------------------------------------------------------------------------
ethernet1/1/1
ethernet1/1/1
ethernet1/1/13
ethernet1/1/25
ethernet1/1/26
ethernet1/1/29
ethernet1/1/30
ethernet1/1/54
ethernet1/1/54
mgmt1/1/1
6. Validez le domain_id VLT
show vlt <domain_id>
Domain ID
Unit ID
Role
Version
Local System MAC address
Role priority
VLT MAC address
IP address
Delay-Restore timer
Peer-Routing
Peer-Routing-Timeout timer : 0 seconds
VLTi Link Status
port-channel1000
VLT Peer Unit ID
----------------------------------------------------------------------------------
1
7. Validez le lien de sauvegarde VLT
show vlt <domain_id> backup-link
VLT Backup Link
------------------------
Destination
Peer Heartbeat status
Heartbeat interval
Heartbeat timeout
8. Assurez-vous de la correspondance avec le domain_id VLT.
show vlt <domain_id> mismatch
VLT-MAC mismatch:
No mismatch
Peer-routing mismatch:
Management_Network
Storage_Network
vMotion_Network
Rem Host Name
Not Advertised
ESXi-CNR42W2-A
Not Advertised
Switch2
Switch2
Uplink-01
Uplink-02
Not Advertised
ESXi-CNR22W2-B
MGMT-01
: 1
: 2
: primary
: 2.0
: e4:f0:04:76:dd:8e
: 1
: 00:00:00:00:00:01
: fda5:74c8:b79e:1::2
: 90 seconds
: Enabled
: up
System MAC Address
e4:f0:04:76:cd:8e
: 100.0.100.11
: Up
: 30
: 90
T Eth1/1/1,1/1/54
T Eth1/1/1,1/1/54
T Po30
T Eth1/1/1,1/1/54
T Po30
T Po1000
Rem Port Id
00:e0:ec:da:e4:f2
00:e0:ec:da:e4:e2
a0:36:9f:d4:fb:2e
ethernet1/1/25
ethernet1/1/26
ethernet1/1/26
ethernet1/1/26
00:e0:ec:da:84:4f
00:e0:ec:da:84:3f
ethernet1/1/42
Status
IP Address
up
fda5:74c8:b79e:1::1
Valider la configuration des commutateurs et du réseau
Rem Chassis Id
00:e0:ec:da:e4:f2
vmnic4
a0:36:9f:d4:fb:2e
e4:f0:04:76:cd:8e
e4:f0:04:76:cd:8e
68:4f:64:68:c7:1d
68:4f:64:58:9f:a5
00:e0:ec:da:84:4f
vmnic5
68:4f:64:68:c7:1d
Version
2.0
37
Publicité
Table des Matières
