Table des Matières
Publicité
channel-group 30 mode active
no switchport
flowcontrol receive off
flowcontrol transmit off
5. Validez la configuration sur la mémoire NVRAM.
copy running-configuration startup-configuration
6. Répétez l'opération sur switch2.
configure terminal
interface port-channel 30
description Uplink
no shutdown
switchport mode trunk
switchport access vlan 1
switchport trunk allowed vlan 100,200,400
vlt-port-channel 30
interface ethernet 1/1/29
description Uplink_Ports
no shutdown
channel-group 30 mode active
no switchport
flowcontrol receive off
flowcontrol transmit off
interface ethernet 1/1/30
description Uplink_Ports
no shutdown
channel-group 30 mode active
no switchport
flowcontrol receive off
flowcontrol transmit off
copy running-configuration startup-configuration
32
Configuration avec commutateurs Dell EMC PowerSwitch Series S4148-ON
Publicité
Table des Matières
