Wine Cell'R WC18FGBK5 Manuel D'instructions page 8

Installing the handle (WC18FGBK5 and WC46FGDZ5 only)
1. Move the door seal behind the handle with your finger. In some models, plastic caps
cover the screws; remove them to expose the screws.
2. Insert the screws into the pre-drilled holes in the handle.
3. Install the handle and tighten the screws.
4. Replace the seal and the door caps.
Reversing the door (WC18FGBK5 and WC46FGDZ5 only)
Before you start
Make sure the wine cabinet is level. Seal the shelves with tape to prevent movement during
the process. The door of this appliance can be installed to open on the left or right side. To
reverse the movement of your wine cabinet door and open it on the opposite side, please
follow the instructions and diagram below.
1. Open the door and unscrew the screws of the lower hinge.
8