Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TEMPERATURE RANGE SELECTION (for 2 zone model):
Press this button to change the temperature range by choosing between E, F, H
or L and wait 3 seconds to confirm your choice.
The temperature of your wine cabinet is, by default, set to E, the ideal
temperature for the storage of red wine.
Screen
E
F
H
L
or
The display window can be set to the OFF position for a more discreet appearance. Your
wine cabinet will continue to operate but the display screen will not be visible. You can
check the temperature of your wine cabinet by pressing the power button.
To change the display window to ON or OFF, press the °C/°F button for 5 seconds while
the control panel is locked. Once the ON/OFF button flashes, press °C/°F a second time
to access the interface option. The ON light will display the data on the screen
permanently and the OFF light will turn the screen off. Leave the control panel untouched
for 5 seconds to confirm your option.
NOTICE:
Temperatures may vary if the interior lighting is on or depending on the position of the
bottles.
Before you start:
The wine cabinet must be installed in a location where the ambient temperature is between
60-80 °F or 15-27 °C. If the ambient temperature is outside this recommendation, the
performance of the wine cabinet may be affected. Installing your appliance in extremely
cold or hot conditions may cause temperature fluctuations inside your wine cabinet.
Temperature range
upper zone
41-54
o
F (5-12℃)
36-54
o
F (2-12
o
C)
41-54
o
F (5-12
o
C)
36-50
o
F (2-10
o
C)
14
Temperature range
lower zone
54-72
o
F (12-22℃)
54-68
o
F (12-20
o
C)
46-66
o
F (8-19
o
C)
54-72
o
F (12-22
o
C)
Publicité
Table des Matières
